AEMC OX 7102 III, Руководство пользователя

Страница: 110 / 226

Multimeter Mode - The "Trigger", "Horizontal" and "Display" Menus
V - 110 SCOPIX
Multimeter Mode (cont’d)
The "Trig" Menu
Source/Level
Selection of trigger type and level on each channel. Triggering takes place if a
condition described by a line of the “Trigger” table is verified.
The trigger level should be defined in the channel measurement dynamic.
Trigger leads to the logging of the instant and trigger characteristics.
The events logged can be accessed from the "Disp."
Æ
"Defaults" menu.
Source
The channel number.
Type
The type of trigger for each channel.
There are several possible types:
¾
None (no triggering)
¾
Lower than
¾
Higher than
¾
Lower/Higher
¾
Exterior
In "Multimeter" mode, several conditions are monitored simultaneously.
Level 1
Adjustment of the main trigger level using the stylus.
Level 2
Adjustment of the auxiliary trigger level using the stylus.
This tab is enabled only if the "External" trigger type is selected.
min duration >
The fault will be evidenced if the fault condition defined by the type and
levels is present for a parameterisable period from 480 ms to 670 ks
according to the selected recording duration (48 ms to 670 ks if your
instrument is equipped wth the EXTENDED ACQUISITION MEMORY
option).
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412