AEMC instruments 6416, Руководство пользователя

Страница: 35 / 48

Clamp-on Ground Resistance Tester Model 6416 35
6.3.1.1 Displayed in Standard Mode
The last measurement is displayed. The
MR symbol and the sequence number
of the record being recalled are also
displayed.
Figure 6-11 illustrates an impedance
plus a current measurement ( Ω+A
setting).
Figure 6-11
The stored values are displayed as
they were when recorded: same display
range, alarm states, NOISE signal,
battery condition, etc.
However, the audible alarms are not
reproduced; only the AL symbol and the
alarm threshold blink.
Figure 6-12 illustrates a current
measurement ( A setting).
Figure 6-12
Press ► to display the measurement
storage date/time screen.
To exit from the MR mode, set the rotary
switch to the desired mode.
Figure 6-13