ᆅჾ
ۉጱྃ੩ഗ
ॲ
֪
INTRO
TRIP UNIT
LOCKS
ACCESSORIES
TESTS
APPENDIX
3.2-02
ୟഗ
BREAKER
NF1:ဣଚگუഘୟഗ
ࠬጎዃ၄ሞଇ߲ࣂࡆฉLj߲ጎዃፌܠሎႹ๑ᆩෙ߲ٲ
੩٫ྺ!4!!9!nn!ڦࠬDŽ९!4/6Džăጎዃኻీሞୟ
ഗڦᅎۯևॲتᇀ!EJTDPOOFDUFEDŽਸDž࿋ዃྜඇٗ
؏ॐฉָူ้๑ᆩă
!
සࡕᄲౚࢇጎዃժҾጎࠬǖ
2/ඓԍୟഗڦᅎۯևॲتᇀ! EJTDPOOFDUFEDŽਸDž࿋
ዃྜඇٗ؏ॐฉָူă
3/!ॽࣂࡆၠࢫླྀ؏ॐዐă
4/!Ҿጎࠬă
සࡕᄲٶਸۨጎዃLjሶথൽူࠬժዘႎჽ؏๕ࣂࡆLj
ᅜՍഄీࠕዘႎ๑ᆩăࠬጎዃౚࢇ้Ljᅜ࠲Կऐࡋோă
๑ᆩࠬۨࣂࡆ้Ljփᄲഽႜჽࣂࡆă
ᅃዖࠀీLj๑ᆩࢽፌܠᅜҾጎ! 3! ߲ۨጎዃLj߲
ۨጎዃሞୟഗتᇀ! UFTUDŽ֪Džई! EJTDPOOFDUFE
DŽਸDž࿋ዃۼۨୟഗDŽ९!4/7Džăౚࢇ้Lj݆
ᅜۉഘݛ๕ईۯݛ๕Կࢇୟഗă
ཞ้ᄺ݆থৎᄩդ٪ݣ࿋ዃă
؏ॐሃጎዃᅃዖሞ߾Ҿጎڦॲăኄዖጎዃᆩᇀ๑
ᆩଇ߲! Spojt! ሃईଇ߲Qspgbmvy! ሃDŽփీं
ᆩDžă
ᅜڇ܀ࠔசժሞ၄ׇҾጎă࠲ᇀሃڦҾጎݛ๕ຫ
Lj൩֖Ԩ֩ڼ!5!বă
සࡕᄲౚࢇጎዃժۨ؏ॐǖ
2 / ඓ ԍ ୟ ഗ ڦ ᅎ ۯ և ॲ ت ᇀ U F T U DŽ ֪ Dž ई!
EJTDPOOFDUFEDŽਸDž࿋ዃྜඇٗ؏ॐฉָူă
3/!ൽူժ٪ݣᄩդăDŽሞഄ٪ݣ࿋ዃዐDž
4/!Ӏొ้ኍݛၠገᅃ߲ईଇ߲ሃժൽူሃă
සࡕᄲٶਸۨጎዃLjሶዘႎ֭ሃժॽഄӀຩ้ኍݛၠ
ገăසࡕᄲٶਸۨጎዃLjଇ߲ሃۼĐՂႷđ၄ă
࠲ᇀጎዃڦҾጎݛ๕ຫLj൩֖Ԩ֩ڼ!5!বă
߁ຎ
௬ӱ
؏ॐ
ۉમ
ྪஏ
TABLES
FRONT FASCIA
CASSETTE
CABLES
NETWORK
GENERAL
padlocking device is present on both slides and each can
accept up to three padlocks with a hasp dimension of 3 to 8
mm (see Fig. 3.5). It can only be used when the breaker's
mobile por
Ɵ
on is in DISCONNECTED posi
Ɵ
on and fully
removed from the casse
Ʃ
e.
To engage the device and place padlocks :
1. Ensure that the breaker's mobile por
Ɵ
on is in
DISCONNECTED posi
Ɵ
on an is fully removed from the
casse
Ʃ
e.
2. Push the slides back into the casse
Ʃ
e.
3. Place padlocks.
To disengage the locking feature, simply remove the padlocks
and re-extend the drawout slides to allow their use again.
The cabinet d oor can be closed with the padlocking feature
engaged.
Do not a
Ʃ
empt to forcefully extend the slides
whilst padlocked.
Casse
Ʃ
e Security Keylocking
An op
Ɵ
onal feature allowing the user to place up to 2 locks
that each can lock the breaker in TEST or DISCONNECTED
posi
Ɵ
on (see Fig. 3.6). It is not possible to close the breaker,
either electrically or manually whilst the lock's are engaged.
Access to the racking handle storage loca
Ɵ
on is also
prevented.
The casse
Ʃ
e keylocking device is a factory mounted
accessory. The device allows the uses of two Ronis or two
Profalux keylocks (cannot be mixed).
The locks can be bought separately and mounted in the
Į
eld.
For instruc
Ɵ
ons on how to install the keylocks, see sec
Ɵ
on 4 of
this manual.
To engage the device and lock the casse
Ʃ
e :
1. Ensure that the breaker's mobile por
Ɵ
on is in TEST or
DISCONNECTED posi
Ɵ
on and is fully removed from the
casse
Ʃ
e.
2. Remove and store the Racking Handle. (In it's storage
loca
Ɵ
on)
3. Rotate one or both keys an
Ɵ
clockwise and remove the
key's).
To disengage the locking feature, simply reinsert the key and
rotate it clockwise. Both keys MMUST be present to disengage
the locking feature.
For instruc
Ɵ
ons on how to install this device see sec
Ɵ
on 4 of
this manual.
؏ॐҾඇሃ
A
4/6B
Gjh/4/6B
4/6B
Gjh/4/6B
4/7
Gjh/4/7
