AEG HES 4890, Инструкция по эксплуатации

Страница: 56 / 82

56
English
Further, in isolated cases problems in playing computer
reproduced CDs or DVDs. (i.e. vacation pictures). In the event
of problems examine the setting of the DVD-reproduction
program on your computer. Ensure that the DVD was finalized.
Further information regarding this subject is available in the
operation manual of your recording device.
Input not possible
If a selected function or entry cannot be performed an error
message “INVALID KEY” is displayed on the screen.
Track: “Track” is the sections of an Audio-CD. This may
pertain to a song, a set of a symphony, etc.
Title/chapter:
Video-DVDs are compartmentalized into
“title” and “chapters”. A “title”, for example may be a speci-
fic movie and “chapters” may be sections of the movie.
MPEG4: Your DVD-Player is also equipped to play data
compressed for MPEG-4 (short for Moving Picture Experts
Group-4) MPEG-4 compression method that allows large
amount of data to be compressed without significantly com -
promising the quality of picture and sound.
Note:
A full global compatibility of compression procedures is not
guaranteed, especially if multiple soundtracks and subtitles
are involved. Even MPEG 4 files with integrated special
menu functions are not always supported. This is not a
malfunction of the unit.
Play Media
Note:
Unless the unit is already set to DVD mode, set it to DVD
mode by pressing the DVD/DVB key (Fig. /1).
You transmit commands to the DVD-Player using the remote
control. It is important that the end of the remote control is
pointed toward the DVD-Player.
Press the EJECT key (Fig. 1/10 / /). That opens the
CD/DVD-compartment.
Insert a CD/DVD into the compartment.
Press the EJECT key again (Fig. 1/10 / /). This will
close the CD/DVD-compartment. The display initially shows
“LOAd” (Fig. 1/14). Upon a short break the type of media
will be displayed (e.g. “DVD”).
Media type (1), e.g. “CD”.
Current track/summary of tracks (2).
Audio output (3): If the MUTE key (Fig. /1) on the remote
controls is pressed, the audio output is deactivated.
Repeat (4):
“x”: No repeat.
“1”: Repeats the current track.
“A”: All tracks are repeated.
Set repeat mode with the REPEAT key.
1.
.
.
-
-
-
Terms
Use Remote Control
Load CD/DVD
Screen Display of
CD-Menu