13
Contents - Special information
sPeciAl informAtion
oPerAtion
1.
General information
.................................................. 14
2.
Safety
.......................................................................... 14
3.
Appliance description
............................................... 15
4.
settings ....................................................................... 15
5.
Cleaning, care and maintenance
............................. 15
6.
troubleshooting ........................................................ 16
instAllAtion
7.
Safety
.......................................................................... 16
8.
Appliance description
............................................... 16
9.
Preparations
............................................................... 16
10.
Installation
.................................................................. 17
11.
commissioning .......................................................... 18
12.
Shutting down
............................................................ 18
13.
troubleshooting ........................................................ 18
14.
Maintenance
...............................................................19
15.
Specification
..............................................................20
wArrAnty
enVironment And recycling
sPeciAl
informAtion
-
The appliance may be used by children
aged 8 and up and persons with reduced
physical, sensory or mental capabilities or a
lack of experience and know-how provided
that they are supervised or they have been
instructed on how to use the appliance safe-
ly and have understood the resulting risks.
Children must never play with the appliance.
Children must never clean the appliance or
perform user maintenance unless they are
supervised.
-
Only use a permanent connection to the
power supply. The appliance must be able
to be separated from the power supply by
an isolator that disconnects all poles with at
least 3 mm contact separation.
-
The power cable must only be replaced (for
example if damaged) with the original spare
part by a qualified contractor authorised by
the manufacturer.
-
Fix the appliance in position as described in
the chapter "Installation / Preparations".
-
Observe the minimum and maximum water
inlet pressure (see chapter "Specification /
Data table").
-
The appliance is under pressure. During the
heat-up process, expansion water will drip
from the safety valve.
-
Regularly activate the safety valve to pre-
vent it from becoming blocked e.g. by limes-
cale deposits.
-
Drain the appliance as described in the
chapter "Installation / Maintenance / Empty-
ing the appliance".
-
Install a type-tested safety valve in the cold
water supply line. For this bear in mind that,
depending on the static pressure, you may
also need a pressure reducing valve.
-
Size the drain so that water can drain off
unimpeded when the safety valve is fully
opened.
-
Fit the discharge pipe of the safety valve
with a constant downward slope and in a
room free from the risk of frost.
-
The safety valve discharge aperture must
remain open to the atmosphere.