--------------------------------------------------------------------------------3/5--------------------------------------------------------------------------------
answer:
0 <CR>
Using the parameter 1..8 the channels 1..8 are switched. Using the parameter 0 switches no chan-
nel.
Mode 3:
The controlling is done with the digital inputs.
3.3
Version
This command shows the actual version of the AMP 4/8.
instruction:
VER <CR>
answer:
AEG ID AMP 4 V1.408<CR>
3.4
Initialization with default values
This command initializates the AMP 4/8 with the default values. You have to save the settings with
the command “VSAVE” if you want to make the values available after reboot.
instruction:
INIT <CR>
answer:
ok <CR>
3.5
Saving of the actual settings
The settings can be saved with the command “VSAVE”.
instruction:
VSAVE <CR>
answer:
ok <CR>
3.6
Changing the baudrate
This command changes the baudrate of the AMP 4/8.
instruction:
BD <SP> 2 <CR>
answer:
2 <CR>
