English
54
Setting up the Loudspeakers
Arranging the Loudspeakers
NOTE:
Do not insert the plug of the DVD player into the socket until all
loudspeakers and connections have been correctly made!
1.
Remove approximately 1,5 cm of the cable insulation.
2.
Turn over the cable end.
3.
Open the cable clamp by pressing the lug.
4.
Now connect the loudspeaker cable supplied to the subwoofer.
Ensure the correct polarity (the marked conductor (white line) is +).
5. Now connect the other cable ends of the loudspeakers accordingly
to the SPEAKERS OUTPUT of the DVD player.
NOTE:
Please ensure that exposed wires do not touch or cross each other.
Danger of short-circuiting!
The correct confi guration and arrangement of a surround sound system
is decisive for the sound that is produced. In order to achieve the best
possible sound, the instructions concerning the arrangement of the
loudspeakers should be followed before they are connected.
Front/Main Loudspeakers (Right and Left, Centre Loudspeakers)
These three loudspeakers produce excellent sound characteristics and
increase the dynamic eff ect of audio playback. The main dialogue of a
fi lm is heard through these loudspeakers.
Rear or Surround Loudspeakers
These two loudspeakers off er dynamic 3-D sound eff ects and create spa-
tial sound playback as they add background noises to the main speakers.
Subwoofer Loudspeaker
The subwoofer is a powerful bass loudspeaker which gives the sound
even more realistic characteristics.
NOTE:
In order to achieve an optimum 3-D sound eff ect, the output from
the centre and subwoofer loudspeaker is is also heard through the
front and rear loudspeakers.
The surround and centre loudspeakers only work when the system
is turned to surround sound.
The ideal confi guration of the surroundsound system depends on the
size of the room and the wall materials. The illustration below shows a
typical arrangement of the various loudspeakers.
05_DVD 4625 HC AEG - GB.indd 54
05_DVD 4625 HC AEG - GB.indd 54
24.06.2010 16:48:49 Uhr
24.06.2010 16:48:49 Uhr
