AEG 24" 4006G-M, Руководство пользователя

Страница: 17 / 31

17
L - Ceramic Cooktop Functions
WARNING
--If the surface is cracked, switch off the appliance to avoid the possibility of electric
shock, for hob surface of glass-ceramic or similar material which protect live parts
-- During the use the appliance becomes hot. Care should be taken to avoid touching
heating elements of the cooktop and inside the oven. Accessible parts may become hot
during use. Young children should be kept away.
All operations relative to installation and electric connection should be carried out by qualified
personnel in conformity with the regulations in force in North America
The specific instructions are described in the booklet section for the installer
NOTICE
•
Use only flat pans with a sufficiently thick base, equal to or not much larger than the hot plate
selected (fig.1)
•
The containers should not have rough bottoms, otherwise scratching will occur.
•
Do not switch the electric plate on without the pan over the plate.
•
Do not cook any food directly on the hot area. Avoid overflows of liquid and should they occur
clean away promptly.
•
The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
Switching on
Set the power by rotating the knob, taking into consideration that the highest number corresponds
with the maximum power.
The pilot light is switched ON when at least one element is on. The residual heat indicator will
light up when the temperature in any area is higher than 50°C.
Cleaning
Remove leftover and grease or spillage from the cooking surface with the special scraper (fig.3)
(optional).
Then clean the heating area thoroughly with a paper towel and ceramic cleaning products for the
correct care of your appliance. Never use abrasive sponge or irritating chemical detergents such
as over spray or spot removers.
FIG-.1