72
Installing the hood in a cabinet
The locking screws must be in place (x 2). If this is not the case, the
hood could drop.
1.
Trace a line using the installation template to guide you (Fig. 7.1.).
Saw along this line and cut a groove at the base of the top part of
the cabinet.
2.
Measure the thickness of the cabinet walls (Fig. 7.2.). The most
common wall thicknesses are 16 and 19 mm. If the thickness is any
different, choose the closest thickness.
3.
Install the suspension bars (Fig. 7.2.) on the installation template.
The drawings illustrate the left-hand side of the cabinet. Fig. A for 16
mm cabinets and fig. B for 19 mm cabinets.
4.
Push the installation template against the side of the cabinet and
secure the fastening bars with screws (Fig. 7.3.).
5.
Turn the suspension bar by half a turn when it is installed on the
right-hand side of the cabinet.
6.
Raise the hood and insert the hooks in the special slots.
7.
Push the hood against the wall. Check that all the hooks are
correctly inserted in the slots.
8.
Install the locking screw (Fig.7.4.).
Fig. 7.1
Fig. 7.2
Fig. 7.3
Fig. 7.4
A
~ 16
~ 19
B
8 cm
-
A
2
3
1
