73
Fig. 8.1
Fig. 8.2
Fig. 8.3
Installation between two cabinets
The locking screws must be in place (x 2). If this is not the case, the
hood could drop.
If the hood is to be installed in such a way that the top edge of the front
panel is aligned with the base of the cabinet (Fig. 8.1.), follow the
instructions provided for "Installing the hood in a cabinet" with 16 mm
walls, points 3-8.
If the hood is to be installed at a height above that of the cabinet base:
1. Use the installation template to trace two vertical lines on either side
(Fig. 8.2.).
2. Measure the height at which the hood must be installed.
3. Install the suspension bars (Fig. 8.3.).
The drawing illustrates the left-hand side. The right-hand side is the
exact opposite.
4. Raise the hood and insert the hooks in the special slots.
5. Push the hood against the wall. Check that all the hooks are
correctly inserted in the slots.
6. Install the locking screw (see "Installing the hood in a cabinet",Fig.
7.4.).
-
