75
Fig. 10
Positioning the charcoal filter
Only applicable for operation in re-circulation mode. Install the LONG
LIFE carbon filter at the back of the grease filters.
The LONG LIFE carbon filter has been produced to reduce/filter
cooking smells as much as possible.
An opening must be made underneath or on the front of the cabinet
(min. 100 cm²) where the hood is installed, so that the filtered air can
circulate freely and return to the kitchen.
Fitting a ducting kit - Fig. 10
Extend the ducting, without stretching it. A duct that is too long or not
straight enough could cut down hood efficiency by up to fifty percent.
Shorten the duct if it is too long and make sure it is as straight as
possible.
A complete ducting kit is sold separately as an optional extra. The flue
duct (A) fits over the hood flue connection ring (B) and is kept securely
in place by a collar. Make sure the duct is as straight as possible and
that it does not impede the movement of the valves in any way. The
duct is connected to the duct outlet by the metal connection ring plate
(C), supplied in the kit.
