AEE
Quad-rotor Aircraft System
Professional
·
Leading
- 1 -
Product Introduction
Thanks for choosing the unmanned aircraft system manufactured by AEE, boasting a globally unique vertical
take-off and landing aircraft with quad rotors. With the integrated design based on the highest standards in the world
and the professional remote control for airborne photography device, ground station control device, and miniaturized
real-time monitoring recording, it can satisfy all requirements under different environments and missions. Stable and
reliable, this system can be operated in a simple and flexible way, used for editing of waypoints on a 3D map, setting
of air routes, real-time sending back such information as coordinates, flight attitude, speed and video. It can also
meet the shooting requirements for multi-dimensional investigation and monitoring. The product is widely applied in
such missions as military reconnaissance, anti-terrorism and riot control, security monitoring, emergency rescue and
disaster relief, patrol and rescue, tracking and search, public security, traffic control, exploration and survey, and
recording and evidence taking, and is favored by various departments and industries like army, armed police, public
security, traffic police, fire control, land administration, electric power, communication, mining and geography.
Safety Precautions
* In the initial stage, please try to avoid operating it alone; it is suggested that an experienced person be on site to
offer guidance for flying.
* It is forbidden to turn off the remote control and the ground station during flying; otherwise, unpredictable
consequence may be caused!.
* During flying, please make sure that only one aircraft is started; to avoid accidents, it is forbidden to simultaneously
start two aircrafts.
* During flying, please make sure that the video and radio antennas have been properly installed to avoid influence
on the aircraft and the video receiving distance or damage to the transmitter module inside the remote control.
* Without authorization, do not disassemble the aircraft or the remote control.
* During outdoor flying, the aircraft can be started only when the GPS signal strength indicator is greater than or
equal to 6.
Forced take-off when the GPS signal strength indicator is lower than 6 may result in the following consequences:
a. When it is beyond the operating range, it may be impossible for the aircraft to go back to the take-off position;
b. When the remote control signals are jammed, it may be impossible for the aircraft to go back to the take-off
position;
c. When switching the automatic flight mode, the aircraft may not hover at the current position;
d. When “One-key Go Home” is enabled, it may be impossible for the aircraft to go back to the take-off position;
* During servo checking and joystick calibration, please make sure that the power switch of the aircraft is in the OFF
state, in order to avoid accidental take-off of the aircraft.
* Please keep away from running parts; when the aircraft propellers are running, do not touch and do keep away
from any rotating part; especially, keep one’s head away from the propellers to avoid injury.
* Make sure there should be no person or obstacle within the radius of 5-10m around the take-off and landing point.
* Keep away from humid environments; prevent water vapor from entering the aircraft which may cause damage to
electronic components or result in unpredictable consequences.
* Please do not use this product in atrocious weather conditions like thundering and raining to ensure personal
safety and aircraft safety.
* Keep away from heat sources, which may lead to aging, deformation or even melting and damage of thermoplastic
materials of the aircraft.
* Do not fly when the wind force is above Level 4, in order to prevent the aircraft from being damaged or lost due to
