2.
EXPLANATION OF PANEL SURFACE
2-1
2. EXPLANATION OF PANEL SURFACE
2.1.
Front Panel (R3755A/R3755TF/R3755E)
1
2
3
4
5
Figure 2-1 Front Panel
2.1.1.
High stability frequency reference adjustment volume (R3755A and R3755TF: available with OPT20)
High stability frequency reference adjustment volume is available
when OPT 20 is installed and is used to adjust the high stability fre-
quency reference value.
2.1.2.
External reference frequency input connector
Connect when using an external reference frequency.
Input frequency (R3755A/R3755TF) : 10 MHz 0 dBm or higher
Input frequency accuracy (R3755A/R3755TF) : Within
±
10 ppm
2.1.3.
Signal source output connector
Outputs measurement signals.
2.1.4.
Receiver input connector
Connects pass target signals.
2.1.5.
Parallel output connector
Connects to a controller (Refer to
(Input: 4 bits, Output: 8 bits, C-MOS level)
NOTE: The model name R3755A is inscribed on this front panel. For the R3755TF and R3755E, the model name
(R3755TF or R3755E) is also inscribed in the same position as the R3755A inscribed position.