Advantech SKY-8101, Руководство пользователя

Страница: 106 / 138

____________________________________________________________________________________________________
SKY-8101S Manual V04 20180321 Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 104
5. Insert a new PSU module into the bay. Make sure the module is fully seated.The
lock will flip to the right automatically when the module is seated.
6. Connect the power cord.
7. The PSU module should start operation and the PSU Status LED PS6 should turn
blue.
8. You may want to check the PSU status via Advanced Platform Management and
also clean the System Event Log.
3.5.3 Disk Drives
3.5.3.1 2.5
” HDD
Note!
You need:
- A PH2 screw driver
- A standard 2.5
” HDD/SSD
To remove the HDD, proceed in the reverse of the installation procedure in Section
3.3.4.1 .
1. Open the front cover.
2. Unlock the tray by moving the lock DT1
to the left. Push the tray’s black button
DT4 to open the tray handle.
3. Grab the tray handle and pull it evenly towards you.
4.
Remove the 2.5” drive mounting screws.
5. Install a new HDD by following the instructions in Section 3.3.4.1 .
3.5.3.2 M.2 SSD
Note!
You need:
- A PH1 screw driver
- A standard M.2 SSD
- Power down the unit
To remove a M.2 SSD proceed in the reverse of the installation procedure in section
3.3.4.2 :
1. Remove the top cover and PCIe card cage
2. Locate the M.2 SSD to be replaced
3. Remove the M.2 mounting screws. Please be sure to hold the last screw as the
spring mechanism in the M.2 connector will flip the M.2 module upwards once the
screw is lose.
4. Extract the M.2 module
Install a new SSD following the mounting instructions of the same section.
3.5.4 DIMMs