Advantech SKY-8101 Скачать руководство пользователя | Manualshive

Страница: 54 / 138

background image

____________________________________________________________________________________________________

SKY-8101S Manual V04 20180321

Copyright 2016 Advantech Co. Ltd. All rights reserved.

Page 52

The BIOS supports and administrator password to restrict access to the BIOS setup
menu to qualified and trusted personal, only.

2.4.12.2 BIOS Defaults

The BIOS comes with a set of configuration parameters when shipped by Advantech
referred to as

“Optimized Defaults” or “factory defaults”. The user can change BIOS

settings via the setup menu either temporarily or permanently by saving the changes as
“User defaults”.

The BIOS loads the User defaults automatically if these have been defined via the
setup. If no User defaults have been defined; the BIOS will load the factory defaults.

2.4.12.3 PCIe Tree

The BIOS also performs an enumeration of all PCIe resources, builds a bus/device map
and assigns resources to the PCIe devices. Most OSes perform a reallocation of
resources during start up. However, the PCIe bus/device map will not be changed by
the OS. The table below gives an overview of the PCIe devices and their corresponding
system function:

2.4.13 Advanced Platform Management

Advanced Platform Management is supported via an integrated BMC running IPMI2.0
compliant system management firmware. Several enhancements have been made to
standard white box server management code to enhance reliability and serviceability of
the system including but not limited to:

- Improved thermal management to cover special scenarios as well as fan degradation

/ failure

- Chassis intrusion and FRU presence detection

- Redundant BMC and BIOS flashes for maximum reliability

- Fail safe BMC and BIOS upgrades using industry standard HPM.1 mechanisms and

tools including automatic rollback on an upgrade failure

- Remote updates of firmware as long as primary power is connected to the unit

- BIOS Watchdog for reliable POST process and improved POST code sensor

- Time synchronization between the BMC and x86 host at startup for consistent event

logs

- System FRU Information synchronization to the host via standard DMI tables

- Large system event log for efficient troubleshooting

- Capability to log system events from the x86 host

- Enhanced security (more information available under NDA)

For a detailed description of Advanced Platform Management features, the BMC
commands and sensor lists please refer to the SKY-8101 BMC User

’s Guide.

2.4.13.1 Hardware and Environmental Monitoring

BMC monitors all critical voltages on the SKY-8101S:

«
...
52
53
54
55
56
...
»

Содержание SKY-8101











































































































































Отзывы:

Нет отзывов

Похожие инструкции для SKY-8101

5big - Network NAS Server

Бренд: LaCie Страницы: 9

Бренд: LaCie Страницы: 14

Network Space MAX

Бренд: LaCie Страницы: 2

Flex System x440 Compute Node

Бренд: IBM Страницы: 584

Бренд: US Robotics Страницы: 36

Modbus Server-FC330A

Бренд: IntesisBox Страницы: 5

Cyclades-PR4000

Бренд: Cyclades Страницы: 174

Бренд: PRIMERGY Страницы: 87

SuperServer 5037C-i

Бренд: Supermicro Страницы: 88

SUPERSERVER 6015C-NT

Бренд: Supermicro Страницы: 110

SUPERSERVER 5018D-MF

Бренд: Supero Страницы: 120

FusionServer 2298 V5

Бренд: Fusion Страницы: 89

Бренд: Digi Страницы: 126

Бренд: Tiger Technology Страницы: 29

Бренд: Gigabyte Страницы: 108

NETWORK SATELLITE 5.0.0 -

Бренд: Red Hat Страницы: 84

Бренд: 3onedata Страницы: 3

ImageServer 2000

Бренд: 360 Systems Страницы: 135

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды