____________________________________________________________________________________________________
SKY-8101S Manual V04 20180321
Copyright 2016 Advantech Co. Ltd. All rights reserved.
Page 98
6.
Install the 2.5
” drive using four screws contained in the disk screw kit as shown
below. Be careful when inserting the drive to not damage the disk light pipes at the
bottom of the tray. Keep the screws loosely inserted into the threads until all four
screws have been inserted. Then tighten the screws one after the other.
Figure 3-23: Mounting the Drive in the Disk Tray
7.
Insert the tray into the disk bay until the drive engages with the connector on the
SAS backplane. Now close the handle and lock the tray by pushing the lock DT1
to the right.
8.
Close the front cover.
3.3.4.2 M.2 SSD
Note!
You need:
- A PH1 screw driver
- A standard M.2 SSD
- 1 M.2 mounting screws (included in the unit)
1. Remove the left PCIe card cage
CG2
2. Make sure the M.2 SSD is compliant with the socket and that the mechanical keys
match.
3.
Insert the M.2 SSD with an angle of approximate 33° in the slot. Press the M.2
SSD downwards.
4.
Install and fasten the fixing screw.
Содержание SKY-8101
Страница 2: ......