POC-615 User Manual
50
9.1
Additional BIOS Utility Functions
1.
Power Button Function
Users can enable/disable power button function in the BIOS utility.
If the power button function is disabled when the device is in S0 (System On)
status, the user will not be able to power off the device using the power button.
Instead, the user will need to power off the device via software. This can prevent
unexpected shutdowns caused by accidentally touching the power button.
BIOS Location
BIOS Menu – Advanced – IT5121 HW Monitor – Power Button Function
Enable: The power button function is enabled when in S0 (System On)
status (default).
Disable: The power button function is disabled when in S0 (System On)
status.
Because disabling the power button function means the system will not power
on when the power button is pressed, when this function is disabled, the BIOS
will set the “State After G3” to “Power On” automatically. Thus, the system can
be powered on by plugging in the power adapter.
2.
Brightness Button Function
Users can enable/disable the LCD backlight button function in the BIOS utility.
If the LCD backlight button function is disabled, users will not be able to adjust
the LCD backlight luminance using this button. This can prevent unexpected
changes in LCD backlight luminance caused by accidentally touching the LCD
backlight button.
BIOS Location
BIOS Menu – Advanced – IT5121 HW Monitor – Brightness Button Control
Enable: The LCD backlight button function is enabled (default).
Disable: The LCD backlight button function is disabled.
3.
Volume Button Function
Users can enable/disable the front volume button function in the BIOS utility.
If the volume button function is disabled, users will not be able to adjust the vol
-
ume using this button. This can prevent unexpected changes in volume caused
by accidentally touching the volume button.
BIOS Location
BIOS Menu – Advanced – IT5121 HW Monitor – Volume Button Control
Enable: The volume button function is enabled (default).
Disable: The volume button function is disabled.
4.
Touch Button Function
Users can enable/disable the touch button function in the BIOS utility.
If the touch control button function is disabled, users will not be able to use this
button to turn off touch control. Thus, the touch function will be always on.
BIOS Location
BIOS Menu – Advanced – IT5121 HW Monitor – Touch Button Control
Enable: The touch control button function is enabled (default).
Disable: The touch control button function is disabled.
Содержание POC-615 Series
