Advantech POC-615 Series, Руководство пользователя

Страница: 34 / 64

POC-615 User Manual 22
3.1 General Safety Guide
For your personal safety and to prevent equipment damage, always disconnect the
power (by pulling the plug, not the cord) and remove the battery pack from the POC
terminal in the following situations:

The power cord or plug is frayed or otherwise damaged.

Any substance is spilled onto the POC terminal.

The POC terminal has been dropped or the case has been damaged.

The POC terminal needs servicing or repair.

The POC terminal needs to be cleaned.

Any internal parts need to be installed or removed.
3.2 Thermal Management
The vent holes in the rear cover of the POC terminal function as air inlets and outlets
for transferring heat from inside the device to the cooler air outside. Do not block
these holes/vents with any material.
The metal heatsink also functions as a cooling surface that transfers heat from inside
the device to the cooler air outside. Thus, it is normal for the heatsink to become
warm during operation. Do not block the heatsink with any material.
To protect the battery pack from overheating, use/charge the battery in accordance
with the instructions provided in the user manual.
Warning!
1. Temperatures that are too high or too low may damage the battery.
2.
If the temperature is too high or too low, the battery may fail to
charge. Batteries may resume charging when the temperature
returns to the acceptable range.
3. Do not place the POC-615 terminal on a pillow or other soft mate -
rial when powered on, as the material may block airflow and cause
the system to overheat.
1. Des températures trop élevées ou trop basses peuvent endom -
mager la batterie.
2. Si la température est trop élevée ou trop basse, vos batteries peu -
vent arrêter la charge. La batterie peut redémarrer la charge lor -
sque sa température revient à une température spécifique.
3. Ne placez pas votre système POC-615 sur un oreiller ou un autre
matériau souple lorsqu'il est allumé, car le matériau peut bloquer le
flux d'air et provoquer une surchauffe du système.