Advantech PCI-1706U, Руководство пользователя

Страница: 15 / 52

9 PCI-1706U User Manual
Chapter 2
Installation
2.2.1 Device Auto Installation (Recommended)
You can install the PCI-1706U module in any PCI slot on your computer. Please fol-
low the steps below to install the module on your system.
1. Turn off your computer and unplug the power cord and cables. TURN OFF your
computer before installing or removing any components on the computer.
2. Remove the cover of the computer.
3. Remove the slot cover on the back panel of your computer.
4. Touch the metal part on the surface of your computer to neutralize the static
electricity that might be on your body.
5. Insert the PCI-1706U card into a PCI slot. Hold the card only by its edges and
carefully align it with the slot. Insert the card firmly into place. Use of excessive
force must be avoided, otherwise the card might be damaged.
6. Fasten the bracket of the PCI card on the back panel rail of the computer with
screws.
7. Connect appropriate accessories(68-pin cable, wiring terminals, etc. if neces-
sary) to the PCI card.
8. Replace the cover of your computer chassis. Re-connect the cables you
removed in step 2.
9. Plug in the power cord and turn on the computer.
10. Install PCI-1706U BioDAQ driver for CD-ROM.
(1) Insert the companion CD-ROM into your CD-ROM drive. The Setup program
will be launched automatically if you have the auto play function enabled on
your system. When the Setup Program is launched, you'll see the following
Setup Screen.
Figure 2.1 The Setup Screen of Advantech Automation Software