Advantech PCA-6181 Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 126

Advantech PCA-6181 Скачать руководство пользователя страница 99

Chapter 6 SCSI Setup and Configurations

8 5

•

Host Adapter BIOS (Configuration Utility Reserves BIOS

Space)

-(Default:

Enable

d) Enables or disables the SCSI card

BIOS.

• Leave at

Enabled

to allow the SCSI card BIOS to scan and

initialize all SCSI devices.
• Set to

Disabled: Not scan

if the devices on the SCSI bus

(for example, CD-ROM drives) are controlled by software
drivers and do not need the BIOS, and you do not want
the BIOS to scan the SCSI bus.
• Set to

Disabled: Scan Bus

if you do not need the BIOS,

but you want it to scan the SCSI devices on the bus and
you need to spin up the devices.

The following four options have no effect when the SCSI Card
BIOS is disabled. (The SCSI Card BIOS is normally enabled by
default.)

•

Domain Validatio

n—(Default:

Enable

d) Determines the optimal

transfer rate for each device on the SCSI bus and sets transfer
rates accordingly. Displays the resulting data transfer rate.

•

Support Removable Disks Under BIOS as Fixed Disk

s—

(Default:

Disable

d) Determines which removable-media drives are

supported by the SCSI card BIOS. Choices are as follows:

• Disable

d— No removable-media drives are treated as hard disk

drives. Software drivers are required because the drives are not
controlled by the BIOS.

• Boot Onl

y—Only the removable-media drive designated as the

boot device is treated as a hard disk drive.

• All Disk

s—All removable-media drives supported by the BIOS

are treated as hard disk drives.

Caution: You may lose data if you remove a removable-media

cartridge from a SCSI drive controlled by the SCSI
card BIOS while the drive is on. If you want to be able
to remove the media while the drive is on, install the
removable-media software driver and set Support
Removable Disks Under BIOS as Fixed Disks to

Disabled

.

«
...
97
98
99
100
101
...
»

Содержание PCA-6181































































































































Отзывы:

Нет отзывов