Advantech PCA-6181 Скачать руководство пользователя страница 93

Страница: 93 / 126

Chapter 6 SCSI Setup and Configurations

7 9

plug to ensure that the device will operate at its maximum speed. If
you use a different kind of terminator plug, the data I/O rate will
decrease.

By default, termination on the SCSI controller itself is set to

Automatic

(the preferred method). We recommend that you do not change this
default setting.

6.5 Configuring the SCSI interface with

SCSI

Select

SCSI

Select

, included with the CPU card, enables you to change SCSI

settings without opening the computer. SCSI

Select

also enables you

to low-level format or verify the disk media of your SCSI hard disk
drives. The following table lists the available and default settings for
each SCSI

Select

option.

Note:

The default settings are appropriate for most systems.
Run SCSI

Select

if you need to change or view current

settings, or if you would like to run the SCSI disk
utilities. See the descriptions of each option starting on
next page.

Содержание PCA-6181































































































































Результаты поиска

Содержание PCA-6181

Отзывы:

Advantech PCA-6181, Руководство пользователя, Страница: 93 / 126

Результаты поиска

Содержание PCA-6181

Отзывы: