manualshive.com logo in svg

Advantech PCA-6181, Руководство пользователя, Страница: 32 / 126

Поделиться
Скачать
Advantech PCA-6181 Скачать руководство пользователя страница 32

1 8

PCA-6181 User's Manual

2.4 USB Port (CN6)

The PCA-6181 provides four USB (Universal Serial Bus) interfaces,
which give complete Plug & Play and hot attach/detach for up to 127
external devices.The USB interface complies with USB Specification
Rev. 1.0 and is fuse-protected.

The USB interface is accessed through a 10-pin flat-cable connector,
CN6. The adapter cable has a 10-pin connector on one end and two
USB connectors on the bracket.

The USB interface can be disabled in the system BIOS setup.

bracket. The bracket installs at the end of an empty slot in your
chassis, giving you access to the connector.

The parallel port is designated as LPT1, and can be disabled or
changed to LPT2 or LPT3 in the system BIOS setup.

To install the bracket, find an empty slot in your chassis. Unscrew the
plate that covers the end of the slot. Screw in the bracket in place of
the plate. Next, attach the flat-cable connector to CN4 on the CPU card.
Wire 1 of the cable is red or blue, and the other wires are gray. Make
sure that wire 1 corresponds to pin 1 of CN4. Pin 1 is on the upper right
side of CN4.

CN6

Pin 1

Содержание PCA-6181































































































































Отзывы:

Нет отзывов