Advantech PCA-6181 Скачать руководство пользователя страница 98 | Manualshive

Страница: 98 / 126

Advantech PCA-6181 Скачать руководство пользователя страница 98

8 4

PCA-6181 User’s Manual

“juke box” device in which mulitple CDs can be accessed
simultaneously.)

•

Include in BIOS Scan

-(Default:

Yes)

When set to

Yes

, the SCSI

card BIOS includes the device as part of its BIOS scan at bootup.

Advanced Configuration Options

Note: Do not change the Advanced Configuration Options

unless absolutely necessary.

•

Reset SCSI Bus at IC Initialization

-(Default:

Enabled

) When set

to

Enabled

, the SCSI card generates a SCSI bus reset during its

power-on initialization and after a hard reset.

•

Display <Ctrl> <A> Messages during BIOS Initialization

-

(Default:

Enabled

) When set to Enabled, the SCSI card BIOS

displays the Press <Ctrl> <A> for SCSISelect (TM) Utility!
message on your screen during system bootup. If this setting
disabled, you can still invoke the SCSI

Select

Utility by pressing

<Ctrl> <A> after the SCSI card BIOS banner appears.

•

Extended BIOS Translation for DOS Drives > 1 GByte

-(Default:

Enabled

) When set to

Enabled

, provides an extended translation

scheme for SCSI hard disks with capacities greater than 1 GByte.

This setting is necessary only for MS-DOS 5.0 or above; it is not
required for other operating systems, such as NetWare of UNIX.

Caution: Changing the translation scheme destroys all data

on the drive. Bue sure to back your disk drives
before changing the translation scheme.

Use the MS-DOS Fdisk command to partition a disk laster than
1GByte controlled by the SCSI card BIOS, when using DOS, Win
dows 3.1.x, ro Windows 95/98.

•

Verbose/Silent Mode

-(Default:

Verbose

) When set to Verbose,

the SCSI card BIOS displays the host adapter model on the screen
during sustem buildup. When set to

Silent

, the message is not

displayed during bootup.

«
...
96
97
98
99
100
...
»

Содержание PCA-6181































































































































Отзывы:

Нет отзывов