manualshive.com logo in svg

Advantech PCA-6181, Руководство пользователя, Страница: 95 / 126

Поделиться
Скачать
Advantech PCA-6181 Скачать руководство пользователя страница 95

Chapter 6 SCSI Setup and Configurations

8 1

Domain Validation

2

        

Enabled, Disabled           Enabled

Support Removable Disks Under     Disabled

             Disabled

BIOS as Fixed Disks

2

        

Boot Only,

     All Disks

BIOS Support for Bootable              Enabled, Disabled           Enabled
CD_ROM

2

BIOS Support for Int 13

     Enabled, Disabled           Enabled

Extensions

2

1

Setting is valid only if Multiple LUN Support is enabled.

2

Settings are valid only if host adapter BIOS is enabled.

6.6 Starting SCSI

Select

Follow these steps to start SCSI

Select:

1.Turn on or restart your system.

During the startup process, pay careful attention to the messages
that appear on your screen.

2.When the following message appears on your screen, press the

Ctrl-A keys simultaneously (this message appearsfor only a few
seconds):

Press <Ctrl><A> for SCSISelect (TM) Utility!

3.From the menu that appears, use the arrow keys to move the cursor

to the option you want to select, then press 

ENTER.

Note:

If you have difficulty viewing the display, press F5 to
toggle between color and monochrome modes. (This
feature maye not work on some monitors.)

Exiting SCSI

Select

Follow these steps to exit SCSI

Select:

1. Press 

ESC 

until a message prompts you to exit (if you changed

    any settings, you are prompted to save the changes before you
     exit.)

2. At the prompt, select 

YES

 to exit, then press any key to reboot the

    computer. Any changes you made in SCSI

Select

 take effect after

    the computer boots.

Содержание PCA-6181































































































































Отзывы:

Нет отзывов