Advantech MIC-5332 Скачать руководство пользователя страница 11

Страница: 11 / 129

1.1 MIC-5332 Overview

The MIC-5332 is a dual socket AdvancedTCA blade based on the Intel® Xeon

E5-2600 series EP processors and C600 PCH (codename Patsburg)

. The MIC-5332

enables the highest performance available in an ATCA form factor with up to 16-cores

and 32-threads of processing power, fast PCI Express gen 3 lanes running at up to

8Gbps,

and best in class virtualization support. Two QPI interfaces between the CPUs

improve memory and I/O access throughput and latencies when one processor needs

to access resources hosted by the other socket. With four DDR3 DIMMs per socket in

a quad channel design running up to 1600MT/s, the MIC-5332 not only offers superior

memory bandwidth over 3-channel designs, but can also support memory densities

up 256GB using latest LR DIMM technology. It outperforms previous generation dual

socket designs while keeping similar thermal characteristics with balanced airflow

resistance.

Using Intel’s latest PCH (C604) with its integrated 4-port SAS controller, the need for

an external storage controller is eliminated, making the MIC-5332 an ideal choice for

cost sensitive control plane applications. While supporting two 10GBaseKX4

interfaces in the base model, support for dual-dual star fabric implementations can be

added by installing the FMM-5001B Fabric Mezzanine Module (FMM). Beyond that,

the FMM type II socket with PCIe x16 connectivity provides extension possibilities for

additional front port I/O, offload and acceleration controllers such as Intel

QuickAssist™ accelerators, IPSec offload engines or customer specific logic. FMMs

not only have higher PCI Express bandwidth than AMCs, but also integrate well in

terms of thermal design and board real estate when compared to Advanced

Mezzanine Cards. Moreover, FMMs can be reused on RTMs and across different

blade designs. This unmatched flexibility combined with the highest performance

Intel® Xeon® processors available make the MIC-5332 equally well suited for

application and data plane workloads.

The onboard IPMI firmware was developed entirely by Advantech to offer greater

modularity and flexibility for the customization of system management features,

especially when it comes to tailoring a system design to meet target cost points

without sacrificing features and time to market. HPM.1 based updates are available

for all programmable components (BIOS, IPMC firmware, FPGA) including rollback

support. Advantech’s IPMI solution, combined with an optimized AMI UEFI BIOS

continues to offer advanced features used on previous generation MIC-532x blades,

such as BIOS redundancy, Real Time Clock Synchronization, and MAC

Содержание MIC-5332


































































































































Результаты поиска

Содержание MIC-5332

Отзывы:

Похожие инструкции для MIC-5332

Бренды по названию

Популярные бренды

Advantech MIC-5332, Руководство пользователя

Результаты поиска

Содержание MIC-5332

Отзывы:

Похожие инструкции для MIC-5332

Бренды по названию

Популярные бренды