Advantech MIC-5332 Скачать руководство пользователя страница 104

Страница: 104 / 129

6.6 NVRAM

Upgrade

In contrast to the BIOS image update, the setting update image is not directly written

to any of the BIOS SPI flashes. The BIOS settings are stored in the external SPI flash

of the IPMC to support a deferred activation. For extended flexibility the external SPI

flash supports different sections to store up to four BIOS setting images in the external

flash at the same time. Each of these settings can be set to “active” at any time and

will be copied to the active BIOS flash at the next OS boot.

6.6.1 Select Upgrade Section (optional)

As described above, the IPMC provides multiple upgrade sections for different

NVRAM sections. OEM commands are used to select the upload and activation

setting from the different BIOS setting sections in the external flash.

[root@localhost ~]# ipmitool hpm check

PICMG HPM.1 Upgrade Agent 1.0.2:

-------Target Information-------

Device Id : 0x22

Device Revision : 0x81

Product Id : 0x5332

Manufacturer Id : 0x2839 (Advantech)

---------------------------------

|ID | Name | Versions |

---------------------------------

Содержание MIC-5332


































































































































Результаты поиска

Содержание MIC-5332

Отзывы:

Похожие инструкции для MIC-5332

Бренды по названию

Популярные бренды

Advantech MIC-5332, Руководство пользователя

Результаты поиска

Содержание MIC-5332

Отзывы:

Похожие инструкции для MIC-5332

Бренды по названию

Популярные бренды