Advantech IDK-1107WP Series, Руководство пользователя

Страница: 29 / 37

21 IDK-1107WP User Manual
Chapter 5
Touch Screen
5.6 Mounting Notes
5.6.1 Mounting
 The gasket of the touch panel must be designed for the outside of the viewable
area to avoid pressing on the touch panel accidentally and the enclosure must
be designed with enough clearance from the panel surface. To avoid pressing
errors on the touch panel, please allow space between the surface of the panel
and the bezel.
 We recommended elastic type materials.
 The edge of the touch panel is conductive. Don’t touch it with metal after mount-
ing.
 Please take notice of grounding while mounting the touch screen, otherwise
interference may cause unstable performance.
 Please do not pull on the flex tail during assembly. Do not bend at 90 degrees
and each bend angle should be no less than R=5m/m
 During assembly, the touch panel must be securely affixed onto the LCD panel
to prevent displacement of the touch panel due to outside force pressing on
touch screen or bezel/case.
5.6.2 Caution
5.6.2.1 Installing and Assembling
 Do not use excessive force or strain to the panel or tail.
 Gasket or cushion pads around the edge of the panel may segregate water and/
or dust contamination.
 Maintain a minimal 5R when bending the tail to prevent dead folds or fold marks.
 Flaws in customer module design may cause functionality issues after assem-
bly.
5.6.3 Operating
 Touch the panel with your finger or stylus only to test normal operation. Any
sharp edged or hard objects should not be used.
 Operate the panel in a steady environment. Abrupt variation on temperature and
humidity may cause malfunctions to the panel.