Advantech IDK-1107WP Series, Руководство пользователя

Страница: 24 / 37

IDK-1107WP User Manual 16
The above on/off sequence should be applied to avoid abnormal function in the dis-
play. Please make sure to turn off the power when you plug the cable into the input
connector or pull the cable out of the connector.
Note 1: The supply voltage of the external system for the module input should be the
same as the definition of VDD
Note 2: Apply the lamp voltage within the LCD operation range. When the back-light
turns on before the LCD operation or the LCD turns off before the back-light
turns off, the display may momentarily become white.
Note 3: In case of VDD = off level, please keep the level of input signal on the low or
keep a high impedance.
Note 4: Interface signal shall not be kept at high impedance when the power is on.
The above on/off sequence should be applied to avoid abnormal function in the dis-
play. Please make sure to turn off the power when you plug the cable into the input
connector or pull the cable out of the connector.
T7 5 - 300 [ms]
T8 10 - - [ms]
T9 10 - - [ms]