18
1
2
3.
Remove the panel back cover and metal cover.
CAUTION:
To avoid scratching the panel while dismantling the system, first place a piece of
cloth or cushion on your work surface.
4.
Take out the main board and then place the board upside down.
5.
If an existing memory card or cards need to be replaced, pull the ends of both metal latches away
from the card to release it.
NOTE:
A memory card can be installed in only one way. Match the notch on the card
with the tab in the memory socket.
6.
Insert the memory card into the socket, almost covering the gold contacts completely, then push
the card down. If the card is fully inserted and properly seated, the metal latches will be in the
closed position indicated.
7.
Set the main board back in place. Next, replace the panel back cover and metal cover.
Содержание EP-55XX-AR10
