AIMB-540 User’s Manual
32
Chapter 3 Motherboard Configuration
3.1 Introduction
This chapter details the motherboard’s default configuration and configu-
ration options. Please review the contents of this chapter to find out infor-
mation on the default configuration or alternative configuration options to
change the default configuration. The motherboard will operate properly
in the default configuration. Please make certain that any configuration
changes you make will not adversely affect system operation.CMOS
RAM Auto-backup and Restore
3.2 The Default Configuration
The default configuration is set at the time of manufacture. The configu-
ration is comprised of the hardware configuration settings and the default
firmware settings in the BIOS CMOS Setup Utility.
3.3 Hardware Configuration: Jumper Settings
This motherboard is mainly configured in firmware, which simplifies
configuration. There are also a few hardware settings. The hardware set-
tings are configured using standard jumper switches. The motherboard
has three jumper switches. The first section is about the IOS-related
jumper and the second about the two hardware configuration jumpers.
3.4 Jumper JCMOS1: Clear CMOS Memory
JCMOS1 is a jumper switch, but it does not set a hardware configuration
setting. The BIOS CMOS Setup Utility creates a system configuration
record that is stored in CMOS memory in the real-time clock chip. If the
configuration record data becomes corrupted or is destroyed, or if the
CMOS Setup Utility settings are changed to an unusable configuration,
the motherboard may not run properly or at all. JCMOS1 provides a
means to delete the configuration data stored in CMOS memory and reset
the configuration to the CMOS Setup Utility’s Optimized Defaults. Fol-
low this procedure to clear CMOS memory. If necessary, refer to the
motherboard diagram and key in Chapter 2 for the jumper location.
1.
Turn off and unplug the system. Remove the system housing cover
(see documentation if necessary).
Содержание AIMB-540
