background image

AIMB-540

 User’s Manual

2

Chapter 1  Introduction

1.1  Introduction

This is the User’s Manual is for the ADVANTECH industrial mother-
board AIMB-540. Anything in this manual that only applies to one board 
is clearly noted. Please read this chapter before you use your motherboard 
and identify which parts of the manual you will need to refer to. Please 
pay particular attention to the Critical Topics section.

What’s In This Chapter?

1.

Introduction

2.

Manual Structure

3.

Manual Features

4.

Critical Topics

5.

Packing List

6.

Pre-Use Checklist

1.2  Manual Structure

This manual has seven chapters covering the following topics:

Chapter 1: Introduction 

Explains the manual structure and conventions and indicates the most 
important topics in the manual. In addition, there is a list of what you 
should find in the motherboard package and some pointers on things to do 
before you configure or install the board.

Chapter 2: Key Features & Components

Details the motherboard’s hardware features and important components 
and indicates their locations. Describes the support software that comes 
with the board on the Power Installer support CD-ROM disc.

Chapter 3: Motherboard Configuration

Lists the motherboard’s default configuration and configuration options. 

Chapter 4: Installing The Motherboard

Has information on how to prepare and install the motherboard. Includes 
installing a CPU and system memory and housing installation consider-
ations.

    

Содержание AIMB-540









































































































Отзывы: