manualshive.com logo in svg

Advantech AIMB-540, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-540 Скачать руководство пользователя страница 22

AIMB-540

 User’s Manual

14

The slots provide a fast high-bandwidth pathway between the mother-
board and expansion cards.

More Information: 

See the section “Connecting & Installing Internal 

Peripherals”in Chapter 4. Technical specifications are listed in Chapter 7.

PCI Expansion Slots :

All slots are Bus Master capable and PCI 2.2 com-

pliant

Figure 2.3: PCI

  

Expansion

 

slots 

2.3.5 Drive Connectors

There are three drive connectors on the motherboard for connecting IDE 
and floppy disk drives.

2.3.6 IDE Drive Connectors

Function:

 The two IDE connectors, marked ‘Primary’and ‘Secondary’, 

are for connecting IDE drives to the motherboard.

Description: 

The IDE controller on the motherboard supports IDE 

devices running in all modes up through ATA-100. There are two IDE 
drive connectors. Each connector supports two drives, a ‘Master’and a 
‘Slave’ which connect to the motherboard with a ribbon cable. The sup-
plied cable supports transfer modes through ATA-100.

More Information: 

See the section on “Connecting Internal Peripherals” 

in Chapter 5 for instructions on connecting IDE drives. Technical specifi-
cations are listed in Chapter 7.

IDE Drive Connectors: 

The channels are labeled on the board.

Содержание AIMB-540









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды