4-6
Wi232/WiUSB User Guide
4.2.5 Connect Mode
Connect Mode defines the unit’s connection method and its reaction to incoming connections over the network.
The current value is displayed in parentheses.
ConnectMode (C0) ? _
Enter Connect Mode options in hexadecimal notation:
Connect Mode Option
7
6
5
4
3
2
1
0
a) Incoming Connection
Never accept incoming
0
0
0
Accept with modem-control_in Active
0
1
0
Always Accept
1
1
0
b) Response
Nothing (quiet)
0
Character response (C=connect,
D=disconnect, N=unreachable)
1
c) Active Startup
No active startup
0
0
0
0
With any character
0
0
0
1
With modem_control_in Active
0
0
1
0
With a specific start character
0
0
1
1
Manual connection
0
1
0
0
Autostart
0
1
0
1
Hostlist
0
0
1
0
d) Datagram Type
Directed UDP
1
1
0
0
e) Modem Mode
Full Verbose
1
0
1
1
0
Without Echo
0
0
1
1
0
Numeric modem result codes
1
0
1
1
1
Incoming Connection
Never Accept Incoming
Rejects all external connection attempts.
Accept with
modem_control_in Active
Accepts external connection requests only when the
modem_control_in input is asserted. Cannot be used with Modem
Mode.
(Not available in Wi232)
Always Accept
Accepts any incoming connection when a connection is not already
established. Default setting.
Response
Character Response
A single character is transmitted to the serial port when there is a
change in connection state:
C = connected, D = disconnected, N = host unreachable.
This option is overridden when the Active Start Modem Mode or
Active Start Hostlist is in effect. Default setting is Nothing (quiet).
