3-14
Wi232/WiUSB User Guide
3.1 Network Configuration
The unit’s network values display upon selecting
Network
from the main menu. The following sections describe
the configurable parameters within the Network Settings configuration menu.
Note:
If the IP address is assigned via DHCP, its DHCP settings are not displayed.
3.1.1 Network Mode
Select Wired Only, Wireless Only or Bridging (One Host)
3.1.2 Automatic IP Address Configuration
To automatically assign an IP address and its network configuration:
1.
Click
Network
from the main menu.
2.
Select
Obtain IP address automatically.
3.
Enter the following (as necessary):
BOOTP
Select Enable to permit the Bootstrap Protocol (BOOTP). The BOOTP server
automatically assigns the IP address from a pool of addresses.
DHCP
Select Enable to permit Dynamic Host Configuration Protocol (DHCP). DHCP
automatically assigns a leased IP address to the Wi232 unit.
Auto-IP
The Wi232 generates an IP in the 169.254.x.x address range with a Class B
subnet. Select the Disable checkbox to disable this feature.
DHCP Host Name
Enter the name of the host on the network providing the IP address.
Note: Consult the System or Network Administrator before adjusting these settings.
