e-zone User Manual
39
General Troubleshooting
If you are experiencing problems with the operation of the system, you may
reset the system using the isolator switch located next to your air-conditioner’s
outdoor unit. Turn the Isolator switch off, and then try pressing the button to
wake the touch screen. The touch screen should be inoperable. After a 5-minute
delay, turn the isolator back on and allow approximately 3 minutes for the
system to initialize.
•
If air volume control is applicable, then increase all zones to 100%.
•
If you have wireless wall sensors ensure the batteries aren’t low, if the
batteries are low a warning will be displayed on your HOME screen.
•
Check for any fault codes that may be displayed in the SETTINGS screen,
if a fault code is shown contact your dealer and advise them of the fault
code.
•
Ensure your e-zone tablet is up to date with the latest app updates from
the Google Play Store, for complete instructions go to
www.advantageair.com.au/update2
•
If you are still experiencing difficulties, contact your dealer for further
assistance.
