Using the Software
14
Just as any regular touch tone phone, pressing the numeric dial buttons
will produce the appropriate sound signals. These sound signals will be
heard only from the computer audio interface (sound card).
First Start
When the application is started for the first time, a red shaded section
will appear, prompting you to select the serial port that will be used to
communicate with the hardware.
You need to select the computer's serial port to which the Data Cable was
connected.
After you've selected one of the four displayed options and pressed
Continue
, the section display will disappear.
Note:
If you selected the wrong port, you can always change the
settings by accessing
Options > Settings > Communication
Channel
, and selecting the correct serial port.
General section
The displayed information in this section varies according to the activity
mode of the application.
Mode
Displayed Info
General
SMS and Voice messages counters are displayed
at the bottom of the section
Turbo Dial editing
Fields for the Turbo Dial record details
Dial/Call
Information on the current activity
Phone Info display
Signal strength, Battery charge status, IMEI, SIM
ID, Phone Number of Line 1, Private ID
On-Screen Keypad
A diagram of the iDEN phone keypad, that allows you to enter phone
numbers, dial, end a call, send call alerts, and operate the PTT button,
directly from the application, using only the mouse.