TECHNICAL SPECIFICATIONS
Call-Point
Material
Stainless
Steel
(Faceplate
&
Housing)
Audio Input Impedance
600 Ohms Balanced line - Transformer Isolated)
Audio Input sensitivity
0db (775mV RMS -1000mV p-p - (internally adjustable)
Audio Output Impedance
600 Ohms Balanced line - Transformer Isolated)
Audio Output Level
0db (775mV RMS -1000mV p-p - (internally adjustable)
Microphone Frequency range
40Hz-18Khz
Microphone
Type
Electret
Condenser
(models built after September 2001)
Loudspeaker Output Power
1200 mW RMS
Loudspeaker
Type
86mm
Mylar
cone
Loudspeaker Frequency Range
150Hz-18Khz
Video Output (Camera Option)
>800mV peak-to-peak @75 Ohms - Transformer Isolated
Video Output Connector
75 Ohm BNC
Push-Button Output (at AVPSU4)
Opto-Isolated, clean contact : Sinks 100mA @ 30 Volts DC
switchable N/O
or
N/C
Power Requirement
24 Volts DC @ 800mA Max.
Max Overall Dimensions
H = 300mm W = 170mm D = (
Top
= 150mm
Bottom
= 100mm)
AVPSU4 Interface & Power Supply (Included in Kit)
Power Adapter Output
24 Volts DC Regulated @ 800mA max (Included in Kit)
Supply Input
24 Volts DC Regulated @ 800mA max
Supply Output
24 Volts DC Regulated @ 650mA max
Call Input
Opto-Isolated : Sources 24 Volts DC @ 12 mA Max
Call Output
SPST Clean Contact -Sinks 30 Volts @ 100mA
Audio in/out to intercom
600 Ohm Balanced Line - Transformer Isolated
Auxiliary Audio In & Out
600 Ohm Unbalanced : RCA Phono and 2-part screw terminal
Adpro I/O connector
15 Pin "D" type plug
Max Overall Dimensions
H = 65mm
W = 105mm
D = 105mm (excluding connectors)
As a consequence to our ongoing policy to improve and/or increase the quality and flexibility of our products,
Advanced Visual Solutions Ltd reserve the right to change the specification or appearance of products
without prior notice.
DOCUMENT NUMBER AV102SS/OEM/01 REVISION 6.1 1st August 2006 Page
22
of 22
