Advanced Radio Smart Bus, Быстрый старт

Страница: 9 / 24

9
General Usage and Screen Information
Important:
The Smart Display that is supplied with the Smart Bus is a touch screen display.
It is used in both setup and provides feedback to the user about battery voltage and milliamps
used. The screen is designed to be mounted in a model for quick and easy use. However the
Smart Bus will operate win normal flying mode without the Smart Screen connected.
Main Smart Screen
Battery 1 (B1) and Battery 2 (B2)
Shows input voltage of both battery packs.
Servo
Shows Regulated voltage to servos
Total mA
Shows total milliamps since last charge.
Press here to enter the Main Menu
Last mA
Shows milliamps since model has was last powered up
and resets when model is turned off. Press here to reset
flight timer and Last mA.
FL - T
Flight timer since model was turned on. The timer only
operated while on the main screen.
FL - N
Flight number since reset. Gives an indication about how
many flights on the models airframe.
Battery Indicators
Shows the remaining capacity in the batteries from 100%
- 0%. NEVER FLY IF THE INDICATORS ARE IN THE RED
.
Main Menu
Return
Returns you back to the previous screen.
Power Button
Press here to go to the battery setup and reset
menu.
Servo Button
Press here to go to the Servo programming menu.
System Button
Pressing here will take you to the System Screen
fro version information etc.
Below is an overview of each screen on the Smart Bus