Advanced Poly-Packaging Ti-1000ZR, Руководство по эксплуатации

Страница: 23 / 55

22
Stored Labels
Label # : This button allows the operator to recall a label. To recall a label, press the Label# button and
type in a number from 001 to 999, depending on the label you would like to recall. Enter the desired label
number into the numeric keypad and press the
ENT button. From the factory, APPI has included at least
one sample label format (001) for testing.
Length : This setting allows the
operator to adjust the label length.
Because the length of the label is
not saved when downloading labels
in memory, APPI recommends that
stored labels are the same length.
Otherwise, you must use a chart
that describes the label format
length for each stored label. To
change this setting, press the
Length button, enter a value into
the numeric keypad and press the
ENT button.
The
Clear Labels button can clear the downloaded label format or the label format that is recalled from
stored memory. However, if data records are downloaded from a database, this button will not erase
stored labels unless there are less than 90 records remaining. Press the
Clear Error button to clear an
error with the printer and continue operation.
NOTE: APPI resells several software packages including: Labelview, Zebra Design Pro and Bartender.
If you are using other software, APPI may not be familiar with the specific settings available in your
software. Refer to your software manual for print speed and darkness settings.
Counters
Total: displays how many cycles between resets. Only total can be reset.
Maintenance: Displays the amount of cycles
the printer has ran. This cannot be reset.
Hours: Displays the amount of time the
machine has been turned on and operating.
Figure 3-5
Figure 3-6