Advanced Poly-Packaging Ti-1000ZR, Руководство по эксплуатации

Страница: 24 / 55

23
Tech Assist
Several screens are available to view
under tech assist to help the operator
trouble shoot a machine and change
critical printer settings. This screen
should only be accessed by
experienced personnel and APPI
service.
APPI: Press to change between Xi3/Xi4, 200/300dpi and APPI?
Factory: View the printer’s status, networks, and configurations. PLC Info: View PLC I/O, status of I/O
and descriptions of each I/O.
APPI Factory
Pressing Xi4/Xi3 will toggle the button to
change between the two. These settings
should match the hardware your machine
has on it.
Printer Status
The printer sends a status message when
turned on and after each print. If an error
occurs, the actual error message will be
displayed on the Printer Status Screen. To
reset the status, press the
Clear Status
button. To recall the status, press the
Read Status button.
Print Config : Press this button to print
the parameters for the printer onto the bag
(i.e. Darkness, Speed).
Print Network : Press this button to print the network configuration, including the current IP address onto
a bag.
Printer Reset button : Press this button to clear labels and start a self-test. This is similar to restarting a
computer.
The Head Cold
ON / OFF toggle button allows the operator to turn the Head Cold Warning feature on
and off. If the Head Cold Warning feature is on, the machine will automatically stop if the print head gets
too cold.
Figure 3-7
Figure 3-8
Figure 3-9