Advanced Poly-Packaging Ti-1000ZR, Руководство по эксплуатации

Страница: 21 / 55

20
Start up
When the printer is first turned on, a screen
will pop up for only a few seconds before
changing to the operation screen.
This screen displays your equipment type,
HMI program and PLC program. It’s
important to note this information if you ever
lose your program due to a loss of power to the
PLC.
Operation
After the startup screen disappears, the
operation screen will show. This screen will
just display a quick status of the printer.
Main Menu
This screen is used for navigating the
program. Many settings and options can be
accessed through this interface.
Operation : Takes you to the operation
screen.
Settings : Make changes to the printer’s
functionality
Labels : To load labels into the printer.
Either from stored or labels created on an
approved software.
Counters : View total cycles the printer has ran, cycles during a production shift and hours the printer has
been on.
Tech Assist : Troubleshoot issues with the printer. View I/O
Printer Settings
The Printer Settings screen displays the printer’s status and label parameters. It also allows for adjustment
of the stored label settings. Refer to Figure 3-3 (above). This screen is accessed by pressing the <settings>
button on the Main Menu.
Press the
ON / OFF toggle button to turn the printer on and off. To manually cycle one bag through the
printer, press the Test button.
Figure 3-1
Figure 3-2
Figure 3-3