Advanced Poly-Packaging T-300, Руководство по эксплуатации

Страница: 34 / 41

33
6.3 Scheduled Maintenance Chart (perform every 500,000 cycles)
CHART
ITEM DESCRIPTION 1 2 3 4 5 6 7 8 9 10
Drive belt
(left panel) Adjust/Inspect for wear
replace when necessary O O O O O O O O O O
Heater element
and wiring Inspect for fraying, cuts,
loose connections O O O O O O O O O O
Pressure bar
Rubber strip Clean, inspect for wear,
replace if required O O O O O O O O O O
Guide rollers Inspect for free movement O O O O O O O O O O
Roller bearings Inspect for free movement O O O O O O O O O O
Perf sensor and
spring Inspect for wear, replace if
necessary O O O O O O O O O O
Rubber drive roll Inspect for cuts, unevenness O O O O O O O O O O
Steel upper roll Clean with alcohol, inspect for
burs O O O O O O O O O O
Printed circuit
Boards / wiring Blow off with clean, dry air,
inspect for loose wires,
connectors O O O O O O O O O O
Seal Cylinders Listen for air leakage, replace
or repair as required O O O O O O O O O O
Air blower
filter Inspect for contamination,
replace as necessary O O O O O O O O O O
Air lines and
connectors Inspect for wear, cuts, leaking,
replace as required O O O O O O O O O O
Print platen
roller Inspect for free movement,
inspect for wear, replace roller
or bearings as required O O O O O O O O O O
Print head belt Inspect for tightness and wear,
tighten, or replace as required O O O O O O O O O O
Print head Clean, inspect for wear,
inspect print quality (missing
pixels), replace as required O O O O O O O O O O
INITIALS