Advanced Poly-Packaging T-300, Руководство по эксплуатации

Страница: 33 / 41

32
6.1 Preventive Maintenance & Scheduled Maintenance
To extend the life of the T-300/T-375 qualified maintenance personnel must perform all
required maintenance tasks. Failure to perform scheduled and preventive maintenance may
cause excessive wear to components and will void the warranty. For the purpose of this manual,
preventive maintenance (PM) tasks are considered periodic tasks which should be performed on
a daily, weekly, or monthly basis.
Scheduled maintenance tasks are performed when the T-300/T-375 Maintenance Chart Number
changes to a higher number. Scheduled maintenance tasks (CHART items) are performed
dependent upon the number of machine cycles and therefore are not considered "periodic" tasks.
Legend for Preventive Maintenance Checklist
D Daily
W Weekly
M Monthly
6.2 Preventive Maintenance Checklist
ITEM DESCRIPTION PERIOD
Filter / Air regulator Drain water from filter D
Air regulator Adjust pressure to 60 PSI D
Antijam device Check operation, adjust as needed (Chapter 4.10) D
Drive rollers Clean with alcohol D
Perforation sensor Clean sensor assembly with alcohol D
Platen print roller Inspect for nicks or cuts, clean with alcohol D
Print head Clean with alcohol (also after each ribbon change) D
Micron filter / Venturi
Inspect for contamination of filter, replace as needed
Inspect for blockage / air restriction
W
Wiring / Connectors Inspect for loose wiring / connectors, tighten as needed M
Air lines / Valves / Cylinders
Inspect for loose air lines, listen for leaks, tighten, or replace poly tubing as
needed
M
Compartments / Covers
Remove all covers, clean, and blow out compartments with compressed air to
Remove dust and dirt
M
Compression (drive rollers) Inspect to ensure parallel w/ each other (bag tracking) M
Drive belt Inspect for wear / fraying, replace if needed M
Drive Belt (print head
assembly)
Inspect for wear, looseness, tighten as required M
CAUTION:
Unplug power cord and disconnect air line prior to removing guards, funnels or
covers. Preventive Maintenance must be performed by qualified maintenance personnel.