Advanced Poly-Packaging T-300, Руководство по эксплуатации

Страница: 39 / 41

38
7.3 110V Circuit
Circuit drawings are provided to assist in troubleshooting the functionality of the T-300 / T-375 and also
the interface signaling with auxiliary infeed equipment. A circuit diagram of the 110V circuit is
comprised of main power to the bagger, through the fuse, Corcom filter, motor controller, solid state
relay, heater element, line out, and into the power supply printed circuit board. See Dwg T375-E1.
7.4 PLC IO LEDs
A Dwg is provided which illustrates the PLC LEDs along with wire colors / pin-outs. See Dwg T375-E2.
7.5 Analog Card, Temperature Controller, Heater Circuit
A circuit diagram of the Analog controller FPO-A21 with correct Dip switch settings is provided. With a
Thermocouple input (TC), the analog card has built in PID and auto tuning functions with 16-bit
resolution for very accurate temperature controls. See Dwg T375-E3.
7.6 Stepper Motor Circuit
A circuit diagram of the stepper motor controller is provided with correct Dip switch and Pot settings.
See Dwg T375-E4.
7.7 H.V. PCB
APPI manufactures the printed circuit board for accurate and consistent perforation detection, for accurate
bag positioning and registration. A circuit diagram is provided for this PCB. See Dwg T375-E5
7.8 Zebra 110PAX4 Interface
PCB
The T-375 Incorporates a Zebra 110PAX4 Interface PCB to provide the status of the Zebra Main CPU
and Print Head. Wiring and descriptions of IO is described on this drawing. See Dwg T375-E6.
7.9 Touch Screen Circuit
The T-300 / T-375 is equipped with a color touch screen. Wiring circuit is provided in this drawing. See
Dwg T300-E7.
7.10 SAV Manifold Wiring Circuit
The T-300 / T-375 is equipped with individual solenoid valve mounted to a manifold. Valves 1 through 5
are standard. Additional solenoid valves may be added for optional equipment. See Dwg T300-E8.