Spatial FOG Reference Manual
Page 49 of 144
Version 2.3
03/05/2018
10.13 Post Processing
Spatial FOG can be used with Advanced Navigation’s post processing platform
Kinematica to achieve high accuracy kinematic positioning of 8mm and significantly
improved dead reckoning performance.
To configure Spatial FOG for use with Kinematica please follow the steps below.
1. Connect to your device using Spatial FOG Manager.
2. Ensure your GNSS ofset and any alignment ofset has been entered as per the
installation checklist in section 9.1.
3. Open the Baud Rates dialogue under the Configuration menu and set the
primary port baud rate to 1,000,000. See Illustration 28. If you are using
Windows ensure you have adjusted the latency settings for the serial port as
detailed in section 11.4.2.
4. Open the Packet Rates dialogue under the Configuration menu and set up the
packets as shown in Illustration 28.
Illustration 27: Enabling packet
60
Содержание Spatial FOG Dual
Страница 1: ...Spatial FOG Reference Manual ...