Spatial FOG Reference Manual
Page 10 of 144
Version 2.3
03/05/2018
Version
Date
Changes
Added event 2 input, section 12.4.28
1.0
14/05/2013
Updated photo
Updated mechanical drawings, section 8.1
Updated electrical specifications, section 8.7
Updated connector pinout, section 8.9
Updated electrical connection example
Updated evaluation cable harness, section 8.10
Updated mounting plate drawing, section 9.3
Added reversing detection, section 10.9
Added motion analysis, section 10.10
Added heave information, section 10.15
Updated odometer input, section 12.4.3
Updated NMEA input, section 12.4.6
Updated NMEA output, section 12.4.7
Added 1PPS input, section 12.4.23
Added wheel speed sensor, section 12.4.24
Added wheel encoder phase a, section 12.4.25
Added wheel encoder phase b, section 12.4.26
Updated detailed satellites packet, section 13.9.12
Added RTCM corrections packet, section 13.9.36
Added external pitot pressure packet, section 13.9.37
Added wind estimation packet, section 13.9.38
Added heave packet, section 13.9.39
Added post processing packet, section 13.9.40
Added raw satellite data packet, section 13.9.41
Added raw satellite ephemeris packet, section 13.9.42
Updated filter options packet, section 13.10.5
Updated GPIO configuration packet, section 13.10.7
Added COM2 and COM3 transmit functions
Added COM2 and COM3 receive functions
Added heave ofset packet, section 13.10.10
Added NMEA output configuration packet
0.6
14/01/2013
Added RTK GNSS foundation knowledge, section 5.5
Completed north seeking gyrocompass, section 10.4.1
Added RTK GNSS operation, section Error: Reference source
not found
Added GPIO pins voltage level, section 12.3.1
Added auxiliary RS232 COM2 multiplexer, section 12.3.2
0.5
09/01/2013
Draft release. Please email
if you notice any
mistakes or anything that is unclear.
Table 1: Revision history
Содержание Spatial FOG Dual
Страница 1: ...Spatial FOG Reference Manual ...