Safe use
9
Osmo1
™
Single-Sample Micro-Osmometer Service Guide
Service & maintenance cautions
•
Unplug the power cord before opening or removing
the covers; otherwise, you may be exposed to electric
shock, excessive temperatures, or mechanical hazards.
•
Performing service or maintenance not detailed in the
User’s Guide, with or without this Service Manual,
should only be conducted by a qualified service
technician.
•
Never restrict airflow into or out of the product. Check
the air vents for blockages periodically.
•
Wipe the exterior of the product with a soft, damp
cloth as needed. Using cleaning products other than
those specified may discolor or damage the finish.
•
A discharge of static electricity from contact with the
human body or another conductor may damage
system boards or static sensitive devices. Never
perform internal maintenance without following
recommended static protection procedures.
•
The product is equipped with operator accessible
fuses. If a fuse blows, it may be due to a power surge
or the failure of a component. Replace the fuse one
time only. If the fuse blows a second time, it is
probably due to the failure of a component part and
all additional service requirements should be referred
to a qualified technician. Always replace the fuse with
one of the same rating, voltage, and type. Never
replace the fuse with one of a higher current rating.
•
If the product requires service for any of the following
reasons, unplug the product from the electrical outlet
and request assistance from a qualified service
technician:
•
The power cord, extension cord, power strip, or
power input module is damaged.
•
Liquid has been spilled into the interior of the
product.
•
A foreign object has fallen into the product.
•
The product has been dropped or damaged by a
falling object.
•
There are noticeable signs of overheating or a
burning odor.
•
The product does not operate normally when you
follow the operating procedures.
•
The main supply fuse(s) or any internal fuse(s)
continually fail.
•
When servicing the product, use only factory-specified
parts.
•
To avoid injury or fire hazard, do not operate this
product in an explosive atmosphere.
•
Use caution and appropriate personal protective
equipment (PPE) if you must put your hands inside the
osmometer. Placing hands into the opening could
result in skin punctures or other injuries.
Hazardous Material warnings
•
WARNING:
Handle all biohazardous materials
according to established good laboratory practices
and follow your institution’s exposure control plan.
Persons handling blood and body fluid samples must
be trained in blood-borne hazards and should observe
Universal Precautions for Preventing Transmission of
Bloodborne Infections as defined by the Centers for
Disease Control and Prevention (CDC). The Universal
Precautions guideline provides infection control by
treating all blood and body fluids as if known to be
infectious. Use personal protective equipment such as
gloves, gowns, etc., to prevent exposure. Store
biohazardous materials in regulated waste containers
and dispose of these materials in a safe and
acceptable manner that is in compliance with all
country, state, and local requirements.
•
WARNING:
When returning this product for service, or
shipping this product to a second location, remove all
hazardous specimens and decontaminate the product
before packaging it for shipment. If the product
cannot be decontaminated, consult with your shipping
agent for instructions on appropriate packaging and
marking.
•
WARNING:
If a biohazardous material is spilled on or
inside the equipment, decontaminate the equipment
using a 1% bleach solution or as outlined by those
policies and procedures established within your
institution.