ADVANCE Easy Moving VACU MATIC FREE, Инструкция по сборке, использованию и обслуживанию

Страница: 7 / 20

7
English
18/07/22 Rev:1.0.5
Check that the product corresponds to the one ordered and that no transportation damage is
evident.
Should this not be the case, please contact immediately the seller.
5 PROPER USE OF THE PRODUCT
The suction caser has been designed to be installed for the pneumatic transport of pellets or other
biomass fuels with a medium-fi ne size;
it has the task of extracting the fuel from the bottom of any hopper tank.
This product is suitable for the extraction of biomass fuel such as pellets, olive pomace,
wood chips, crushed shells of dried fruit, corn, but it cannot work with fuels having a very
fi ne size, or having excessive dimensions and, in any case, having lengths over 40 mm or
diameter greater than 15 mm.
It is recommended to use only ENplus A1 certifi ed pellet.
To provide the job for which it was designed, the suction case must be connected to a control
panel called that controls the operation of the entire pneumatic transport system or to an integrated
central vacuum unit called.
Once installed and connected, the suction case extracts the fuel until the tank is completely
empty; by the movement of the rod-crank mechanism positioned in front of the suction inlet, a
possible blockage or clogging of the inlet itself because of slag or irregular dimensions fuel is
avoided.
4 PACKAGING CONTENT
After opening the packaging, verify that the material contained in it conforms to the following list:
1) Extraction system
2) Assembly, use and maintenance manual
3) Flow regulator
4) gum s 2 hose clamps
5) Warranty form
2
3
4
M
anuale
T
ecnic
o
1
5