ADTRAN SMART/RG SR506n, Руководство пользователя

Страница: 96 / 161

SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020 96
4. Map the ports for the WAN or LAN interface:
a. Select an interface from the applicable Available Interface list (on the right).
b. Add it to the Grouped Interface list (on the left) by clicking the arrow to create the required mapping of the ports.
Hold down the Shift key to select multiple interfaces.
Note: Depending on the WAN interface configuration, these clients may obtain public IP addresses.
5. To automatically add LAN clients (such as set-top boxes) to a WAN Interface in the new group, enter the DHCP Vendor ID
string. You can add up to 16 vendor IDs.
When you configure a DHCP vendor ID string, any DHCP client request that includes this vendor ID is denied an IP address from
the local DHCP server (DHCP option 60).
6. Click Apply/Save . Your changes take effect immediately.
7. To remove a grouping, on the Interface Grouping list page, select the grouping and click Remove . You can only remove group-
ings that you create.
IP Tunnel
IP Tunneling is typically used as a means to establish a path between two independent networks. Your SmartRG gateway supports con-
necting islands of IPv6 networks across the IPv4 internet or IPv4 in IPv6 as well.
On this page, you can configure IP tunnel settings.
Note: For IPv6inIPv4, only 6rd configuration is supported. For IPv4inIPv6, only DS-Lite configuration is supported.
IPv6inIPv4
On this page, you can configure the IPv6inIP4 settings.
1. In the left navigation bar, click Advanced Setup > IP Tunnel and then click Add . The following page appears.
2. Enter a descriptive Tunnel Name .
Skip the Mechanism field. Currently, only the 6RD mechanism is supported.
3. Select the WAN and LAN interfaces associated with the tunnel you wish to establish.