SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
77
Field Name
Description
Ingress Interface
Select an interface for incoming data. Options are
LAN
,
WAN
,
Local
and any interface
already configured for your gateway.
Ether Type
Select the Ethernet interface type for this classification. Options are
IP
,
ARP
,
IPV6
,
PPPoE_DISC
,
pPPoE_SES
,
8865
,
8866
, and
8021Q.
802.1P priority
(
For
Ether Type
of
8021Q
only
) This value is inserted into the Ethernet frame and used
to differentiate traffic. Lower values assign higher priorities. Options are:
1
-
7
.
Source MAC Address
Source MAC Mask
(
Not applicable for
Ether Type
of
8021Q
) Enter the source MAC Address and Source
MAC Mask for this classification.
Destination MAC Address
Destination MAC Mask
(Not applicable for
Ether Type
of
8021Q
) Enter the destination MAC Address and des-
tination MAC Mask for this classification.
Source IP Address[Mask]
(Not applicable for
Ether Type
of
8021Q
) (Optional) Enter the source IP address and
subnet mask for this classification, or select a DHCP option from the drop-down list and
enter the address and mask for that server.
Destination IP Address
[Mask]
(
Optional
)
(Not applicable for
Ether Type
of
8021Q
) Enter the destination IP address
and subnet mask for this classification.
Differentiated Service
Code Point (DSCP) Check
(
Optional
)
(Not applicable for
Ether Type
of
8021Q
) Select the desired DSCP code for
marking incoming data.
Protocol
(
Optional
)
(Not applicable for
Ether Type
of
8021Q
) Enter the Protocol specified for
this classification.
Specify Class Queue
(Not applicable for
Ether Type
of
8021Q
) Select from the available queues.
Note:
Make sure to select a queue that is configured for the interface that you selected.
If you select a queue that is not configured for the selected interface, any packets clas-
sified into that queue are processed by the default queue for the interface.
Specify Classification Results
section
Specify Egress Interface
Select the egress interface for this rule. Options are the interfaces already configured.
Specify Egress Queue
Select the egress queue for this rule. Options are the queues already configured.
Mark Applied Dif-
ferentiated Service Code
Point
Select the desired DSCP code for marking classification results.
802.1P priority
This value is inserted into the Ethernet frame and used to differentiate traffic. Lower
values assign higher priorities. Options are:
1
-
7
.
Set Rate Limit
Enter the data traffic rate limit (in Kbps) applied for this classification.
Содержание SMART/RG SR506n
Страница 34: ...SmartRG Inc an ADTRAN company All Rights Reserved 2020 34 5 Click Next The following page appears...
Страница 42: ...SmartRG Inc an ADTRAN company All Rights Reserved 2020 42 5 Click Next The following page appears...
Страница 130: ...SmartRG Inc an ADTRAN company All Rights Reserved 2020 130...
